Hp latex360 not drying

[Eimantas]

Hi i have a problem, with every color is allright when drying with 8 passes and 113 temp. but only blue ink is not drying properly. It leaves like wet stains.

 

[balstestrat]

What material? Raise to 116 and add 500ms interpass delay. See if that helps.
Then you can try to lower it or switch to 10-pass. You probably have a very dark blue image with a lot of color?

 

[Eimantas]

It's on Ritramas matte or gloss vinyl. It's like 2 meters long and 1.2m wide company logo full filling image.

 

[Eimantas]

What material? Raise to 116 and add 500ms interpass delay. See if that helps.
Then you can try to lower it or switch to 10-pass. You probably have a very dark blue image with a lot of color?

It's on Ritramas matte or gloss vinyl. It's like 2 meters long and 1.2m wide company logo full filling image.

 

[MikePro]

Labas! Mano šeima kilusi iš Šiaulių

got pictures of these "wet stains"? could just be a media issue and you're only noticing it in certain colors. The plastic in older media becomes imperfect/mottled and will resist ink in blotchy/rain-spotted patterns.