Is 3m Envision 8048 Laminate Okay For Vehicle Wraps Or No?

[0igo]

I haven't used a non pvc material before and was wondering if the 3m Envision 8048 laminate was okay for vehicle wraps such as a 2013 honda civic? i'm on fellers and its placed under their "thinner/cast overlaminates" but it doesnt specify if its cast or calendared. any help is appreciated. thanks.

 

[GAC05]

I haven't used a non pvc material before and was wondering if the 3m Envision 8048 laminate was okay for vehicle wraps such as a 2013 honda civic? i'm on fellers and its placed under their "thinner/cast overlaminates" but it doesnt specify if its cast or calendared. any help is appreciated. thanks.

I'd say no, it is listed as an intermediate calendered film. No good for vehicle wraps unless you are doing a flat paneled box truck with out rivets.

 

[0igo]

I'd say no, it is listed as an intermediate calendered film. No good for vehicle wraps unless you are doing a flat paneled box truck with out rivets.

thanks. i couldnt find anywhere where it said it was intermediate.

 

[GAC05]

thanks. i couldnt find anywhere where it said it was intermediate.

I think I jumped the gun calling in calendered. They use the same description as a calendered film but under Cast or Non-cast it says N/A
Same doc shows intermediate graphics as one of the suggested uses.
https://s3.amazonaws.com/fellers/pr...duct-bulletin-current-september-2016-1296.pdf

wayne k
guam usa

 

[Christian @ 2CT Media]

It's super pliable but 3M is cautious to say you can wrap with it. Just treat it like you would 8508.