Hi guys,
My first post, so here we go.
I bought a clone machine of the jv-33 with genuine dx5 heads. Have always had issues with the yellow. Am using DIT inks (local 3rd party supplier in Melbourne) who have done their best in helping me out, but to no avail thus far. I have had to change the head twice. Yellow was totally flushed and worked well for three weeks, and tonight, just dropped out. Nozzle test shows all the other colours fine except yellow. I try and suck through the ink. It starts off well, them 20cm in it goes again. I emphasise this only happens with the yellow. We have changed the head, the dampers, the boards, flushed the bulk ink cartridges, changed the lines.
My question is whether or not anyone has had these issues with this ink(if they have used them at all) and whether i should just try a different yellow. Am considering jetbest. Your advice/thoughts would be greatly appreciated.
Thanking you in advance
My first post, so here we go.
I bought a clone machine of the jv-33 with genuine dx5 heads. Have always had issues with the yellow. Am using DIT inks (local 3rd party supplier in Melbourne) who have done their best in helping me out, but to no avail thus far. I have had to change the head twice. Yellow was totally flushed and worked well for three weeks, and tonight, just dropped out. Nozzle test shows all the other colours fine except yellow. I try and suck through the ink. It starts off well, them 20cm in it goes again. I emphasise this only happens with the yellow. We have changed the head, the dampers, the boards, flushed the bulk ink cartridges, changed the lines.
My question is whether or not anyone has had these issues with this ink(if they have used them at all) and whether i should just try a different yellow. Am considering jetbest. Your advice/thoughts would be greatly appreciated.
Thanking you in advance