• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

JV3 message error 07 head -------*

mindgames.1

New Member
Same thread, same problem "JV3 160SP" message error: ERROR 07 head ----**--

And here we are again:
"JV3 160SP" message error: ERROR 07 head ----**--

Some news about?
Help needed, please! :omg:
 

anglin

New Member
Hi ,

Here is my take on it, make sure that you are pulling ink through the heads or the machine will give you that "error 07". physically pull the drain lines out so you can see them. Since you are getting only one side of the head with an error response. look inside the capping station after 'fill up ink' and make sure that both side are in fact pulling.

the Mimaki JV3 is a fine machine, but you have to constantly check to make sure that ink is pulling through the heads.

I think you may have a blocked head.

regards

anglin
 
Top