DigitalBBQ
New Member
Anyone has any idea how to print Roland Versawork print/cut crop marks using JV33? (Favor the JV33 print speed, but need to use SP540v to cut the countour )
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
JV33 to print Roland Versawork Print/Cut Crop Marks
- Thread starter DigitalBBQ
- Start date
DigitalBBQ
New Member
Normally the versawork is using to send PRINT, and CUT job consecutively or send it PRINT first, then go laminate, and come back to CUT later within the versawork application. However, we have the JV33 and thought it may be possible to send the versawork crop marks and the artwork printing to JV33, and then bring back to Roland's versawork to do the cut.
May be there is a little trick to output the versawork print/cut registration marks ?
Or anyone know how to add JV33 printer device to the v7.6v2 ?
May be there is a little trick to output the versawork print/cut registration marks ?
Or anyone know how to add JV33 printer device to the v7.6v2 ?
SignsOfMaine
New Member
ugh... best guess:
Get all the settings (including crop marks) the way you want, then choose to save rather than print. Save it as a .prt file. Then use one of the prt-to-pdf converters like PDF Converter Pro. Once it's a PDF you can do whatever you want with it, including drop it back into versa.
Get all the settings (including crop marks) the way you want, then choose to save rather than print. Save it as a .prt file. Then use one of the prt-to-pdf converters like PDF Converter Pro. Once it's a PDF you can do whatever you want with it, including drop it back into versa.
synergy_jim
New Member
good luck with that....
DigitalBBQ
New Member
Versawork rip can only save job(s) or export as its native file(s). And it can only be translate or read by its rip. The rip engine is the one sending the crop marks. It will encoded the crop marks when sending data to the printer to print them.
cgsigns_jamie
New Member
Flexi should be able to do this, when you send it to the printer just select the roland crop marks in the settings window of print setup.
You will to have both machines setup in production manager in order for this to work, you will send both the print file and cut file directly from Flexi.
I don't have my Flexi key with me at the house so I can't walk you through the setup process right now but I know it can be done.
You will to have both machines setup in production manager in order for this to work, you will send both the print file and cut file directly from Flexi.
I don't have my Flexi key with me at the house so I can't walk you through the setup process right now but I know it can be done.
DigitalBBQ
New Member
On Flexi v8.6 should be no problem the device of both setup are there, but how to add JV33 printer device on the Flexi v7.6v2 ?