tooserious
Premium Subscriber
Has anyone ever repaired a knife cut in flex face????? The back ground ids solid blue on white flex face
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Knifed Flex face (NOT TOO BIG)Can it be repaired
- Thread starter tooserious
- Start date
Has anyone ever repaired a knife cut in flex face????? The back ground ids solid blue on white flex face
tooserious
Premium Subscriber
Christian @ 2CT Media
Active Member
Can you heat weld a back patch on there or use hh66 cement to glue a patch to the back?
It won't fix the look but it will prevent further damage.
It won't fix the look but it will prevent further damage.
MikePro
New Member
+1 patch/weld it from the backside as suggested above. clients would rather deal with a dark spot at night, as it is cheaper/faster than a complete replacement.
at least you have a clean-cut line to fix. my last patch, was a 6ft burn hole from a welder's spark that fell 30ft. while setting a pylon and started a 10ftx20ft flexface on fire.
ultimately replaced the face, but the patch held for a month til we could make the return trip!
at least you have a clean-cut line to fix. my last patch, was a 6ft burn hole from a welder's spark that fell 30ft. while setting a pylon and started a 10ftx20ft flexface on fire.
ultimately replaced the face, but the patch held for a month til we could make the return trip!