Question Looking for a engraver that make these signs

[BPSAFF]

There will be 30 of these, 18" x 18", raised letters (will be maroon) on a brushed metal 1/8" lasermax material. The fire escape route looks to be printed on white acrylic with a flatbed printer then set on top of the lasermax. Any help would be greatly appreciated.

 

[IDB Signs]

We use a Vision for ADA/ engraving projects. Works pretty well.

 

[Evan Gillette]

Might be a good application for a direct color systems printer, depends on the look you are going for. Is that a picture of an actual sign? It almost looks like a mockup to me. Not sure how you would cut out acrylic and have the details be durable enough (the arrows and exit words) to hold up. If you are looking to sub them out I think Johnson Plastics would probably quote them using a Direct Color printer to give a raised effect on the diagram and text.

 

[ewded]

Everything is raised, why not apply printed and cut vinyl?

 

[BPSAFF]

Might be a good application for a direct color systems printer, depends on the look you are going for. Is that a picture of an actual sign? It almost looks like a mockup to me. Not sure how you would cut out acrylic and have the details be durable enough (the arrows and exit words) to hold up. If you are looking to sub them out I think Johnson Plastics would probably quote them using a Direct Color printer to give a raised effect on the diagram and text.

This is an image of one of the actual signs. I will check with Johnson Plastics. I did even think of them. Thanks for the heads up on this.

 

[BPSAFF]

We use a Vision for ADA/ engraving projects. Works pretty well.

I will check with A Vision also along with Johnson Plastics. Thank you for your input.

 

[Broome Signs]

HI

You will find it's UV printed, with 3-6 overprints to make the lettering raised

 

[Gene@mpls]

This looks like a job for a laser to me.