Looking For Brushed Aluminum Blanks

[onedge]

Where is the best place to get brushed aluminum blanks. I need some 3" x 5", 2.5" x 5" and 2" x 6.75" looking for a good many of them for a customer order

 

[Johnny Best]

Grimco carries 3mm Maxmetal one sided with a brushed aluminum finish on one side. I just cut them up on the table saw.

 

[onedge]

Grimco carries 3mm Maxmetal one sided with a brushed aluminum finish on one side. I just cut them up on the table saw.

that is a possible option that I gave them. That is thicker than what they currently have. One of the plates they engrave a serial number and date on

 

[petepaz]

harbor sales you will have to order 4x8 sheets and they cut them down

 

[eahicks]

Order a sheet of brushed aluminum. Cut it down.

 

[Cory Marcin]

Look at Speedy Metals. http://www.speedymetals.com/

 

[CPRsigns]

that is a possible option that I gave them. That is thicker than what they currently have. One of the plates they engrave a serial number and date on

Montroy carries .040 Bright brushed aluminum.

 

[signmania]

Contact a local engraving shop. They may have the material available.

 

[gnubler]

Bumping this. Looking for .063 or 1/16" brushed aluminum to match some existing plates. Any recs on where I can get a small sheet or have some pieces cut down to size? All I'm coming up with is ordering full sheets of .040...don't need that much and that's too thin.

 

[Gino]

Laminate some brushed vinyl onto pre-cut .063.


Go have a great day.

 

[Johnny Best]

Sample Ordering - Chemetal

www.chemetal.com

They have all metal laminates

 

[Z SIGNS]

Buy a 4x8 sheet and buy a step shear and you will never have to ask this question again for the rest of your life

 

[Boudica]

Bumping this. Looking for .063 or 1/16" brushed aluminum to match some existing plates. Any recs on where I can get a small sheet or have some pieces cut down to size? All I'm coming up with is ordering full sheets of .040...don't need that much and that's too thin.

what sizes do you need?

 

[gnubler]

Buy a 4x8 sheet and buy a step shear and you will never have to ask this question again for the rest of your life

On my list!

I'm checking with a local engraving shop, it's such a small order. I need around 20 plates 36" wide x 2" tall. I think I can get away with using .040 1/64" aluminum.

Gino - I am looking into that idea also, to wrap it with brushed metal vinyl.

 

[Gino]

On my list!

I'm checking with a local engraving shop, it's such a small order. I need around 20 plates 36" wide x 2" tall. I think I can get away with using .040 1/64" aluminum.

Gino - I am looking into that idea also, to wrap it with brushed metal vinyl.

Good for you and don't forget to have a great day !!!