Need Help Looking for Gerber 750 plus >Superior Y Axis motor with good gear M062-LS-557E

[Colt67]

Looking for a good used Y axis motor with gear for Gerber gs750 plus plotter M062-LS-557E

Thank you for any help

 

[James Burke]

I have a bunch of stuff from a GS 15, but I would assume they're not compatible. Can you take a photo of the motor specs?


JB

 

[Colt67]

I have a bunch of stuff from a GS 15, but I would assume they're not compatible. Can you take a photo of the motor specs?


JB

I do not think 15plus motor is the same but this is the motor M062-LS-557E and gear has 16 teeth

 

[James Burke]

I do not think 15plus motor is the same but this is the motor M062-LS-557E and gear has 16 teeth

Unless somebody has one they're parting out here on the forum, your best bet is The Plotter Doctor.


JB

 

[Colt67]

thanks JB I 'm concerned of the metal gear having the grooves in it (is it suppose to have the teeth grooved out ). the black jack shaft gear is plastic >>and plastic should not wear out the metal gear. Does anyone have a picture of their good Y motor gear to compare?