Looking for old parts

[archerdesign]

Hi...anyone out there happen to have a cutting strip and/or a blade holder for a Roland PNC-1100? Roland does not make them anymore. Thanks in advance!!

Dave Archer
Roberts Creek, BC

 

[Techman]

you can make cut strips by purchasing HDPE in the correct thickness and width from McMAster Carr for about 15 bux.

It will be a sheet about 1/16 or 1/8 inch thick. Cut off the width you need.

 

[J Hill Designs]

https://www.beacongraphics.com/supplies/cutter-strips.html

http://www.beacongraphics.com/pdf/2006/catalog-18.pdf

 

[OldPaint]

cutting strip and blade holder are the SAME..... for the PNC-1100 as is the CX-24, CX-300, CX-400, CX-500 or any of the numerous PNC-XXXX models after the 1100......i have a CX-300 and my pens from PNC-1000 fit in the CX-300

 

[archerdesign]

Thanks for all the advice and websites!