Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Looking for profile suggestions for Epson s40600 and FlexiSIGN 12

Discussion in 'Epson' started by RG, Oct 15, 2019.

  1. RG

    RG Active Member

    Dec 6, 2006
    South Mississippi
    Hello. I'm looking for profile suggestions for FlexiSIGN 12 and a Epson s40600 printer. Not looking for anything exotic, just something for 13oz gloss banner, calendared viny, and cast vinyl. I see nothing on the SAi website for this printer. They do have profiles for a s60600 printer. Will those work in a s40600 printer? I see that Orafol has several profiles for their vinyl. Will those profiles work equally as well for 3M or Briteline vinyl? Thanks for any suggestions. Just trying to make good prints and save some time and media by starting out with the best profiles.
  2. jfiscus

    jfiscus Map Wraster

    Apr 2, 2009
    Cincinnati, OH
    Get an EyeOne or other reader and get going making your own profiles.
    We use 1 profile per printer pass setting, whether it is gloss/matte/3M/Arlon/etc to keep everything as simple as possible.
    The only thing that is really different is the number of passes and the media height on the printer.
    • Informative Informative x 1
  3. ProPDF

    ProPDF Member

    Jan 8, 2015

    The 60600 profiles should work....the 80600 would be different though. Flexi 12 may not have the 40600 as a device option so just add the 60600 device option.
    • Informative Informative x 1

Share This Page