mesh banner profile

[shooter]

View through vinyl profile? I will be printing on us banner 8oz material with liner using the xc-540.

 

[shooter]

View through vinyl profile? I will be printing on us banner 8oz material with liner using the xc-540.

Anyone have a suggestion?

 

[Digitall]

probably generic vinyl or glossy calandered will work good

 

[shooter]

I did a test print on standard 13 0z banner profile and that seemed to work as well. I will try the others, Thanks

 

[Tharnpheffa]

I use GCVP for just about everything (sp540)

 

[cdiesel]

We use the LBV profile on billboard mode.

 

[shooter]

We use the LBV profile on billboard mode.

Thanks for the tip, biiboard mode looked great and was smokin fast. I found the banner tape not to work very well though. I am having these sewn. The test ones I did the tape seperated by the next day. I did some testing with pvc glue and it held suprising well. Messes up the ink though.

 

[gabagoo]

i just printed some mesh banner for myself and if I do it again I would probably give it a double hit or print at 1440 x 720 due to the holes. Looks like window perf, al ittle washed out

 

[Pacific Coast Sign]

If all else fails - Glossy Calendered Vinyl GCVP setting is a great "go to" profile

 

[shooter]

Thanks for the tip, biiboard mode looked great and was smokin fast. I found the banner tape not to work very well though. I am having these sewn. The test ones I did the tape seperated by the next day. I did some testing with pvc glue and it held suprising well. Messes up the ink though.

tried new tape by us banner, problem solved on hemming. Will try a test on seams to see how it holds up!