Mimaki jv33 Please Help

[Stickersmith llc]

i recently bought a used mimaki jv33-130 from a company called omnicapital online. They said it was a lease that was returned. Said it was in working condition and I asked if it had been shutdown properly before being shipped to them and they said yes. I got the machine and there is still ink in the lines and dampers. I have not dealt with one of these in about 10 years, but that seems wrong. I just unpacked it and have done nothing to it besides remove the carriage cover. This machine was obviously not well taken care of in the past and I was told it has been sitting for about a month. The ink is not dry in the dampers and it is using es3 inks.
My question is if this machine is ruined and I was lied to about it’s condition? Should I return it? Should I turn it on and try doinganything to flush the lines? Please help mefigure out my next steps. Thank you

 

[FerSerra]

Do you try to use it?

 

[Stickersmith llc]

Do you try to use it?

Yes I did and the head produced no test print

 

[jon vital]

Maybe just try doing the ink refill and a few head cleans..

 

[CMYKENGINEERING]

You should proceed "head wash" procedure before start print anything. Read user manual-maintaince procedure first. You can try remove air and recover printheads by disconnet waste tube from cappa and suck ink by syrenge slowly instead pump.