Mimaki RasterLink 6 - "QuickSets"

Offsign · Aug 14, 2019 at 2:38 PM

Hi all,
we bought new printer CJV150-160 and got Mimaki RIP Rasterlink 6 with. Since now we used OnyxRip with our HP L26500 printer. In Onyx I am using quick sets for each job with media, resolution, pass... settings. Is here any option in Rastrelink for quick pre-set the printing properties and settings? I mean some quick set for each media type like paper, cast film, banner etc.. Thank you for any help.

Cheers,
Jirka

Solventinkjet · Aug 14, 2019 at 3:00 PM

In Rasterlink they are called "Favorites". If you click on the profile tab and then look up to the top left of that window there will be a, "Favorite" tab. You set all of your settings how you want them and the save the favorite as anything you want. This will create a separate hot folder for each favorite you save and will also give you an option when opening a file directly in Rasterlink to select which favorite you want the new file to be opened as. Hope that helps!

Offsign · Aug 15, 2019 at 12:11 PM

Solventinkjet said: ↑

In Rasterlink they are called "Favorites". If you click on the profile tab and then look up to the top left of that window there will be a, "Favorite" tab. You set all of your settings how you want them and the save the favorite as anything you want. This will create a separate hot folder for each favorite you save and will also give you an option when opening a file directly in Rasterlink to select which favorite you want the new file to be opened as. Hope that helps!
Click to expand...

Great, thank you. Tryout tomorow THX

Log in / Register

Forums

Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

Mimaki RasterLink 6 - "QuickSets"

Offsign New Member

Solventinkjet Printer Fixers

Offsign New Member

Help, please - Mimaki CG-130 FX - How to read a print file for Cutting from RasterLink6 to FineCut8

Help, please - Mimaki CG-130 FX - How to read a print file for Cutting from RasterLink6 to FineCut8

How to change the ink type on a Mimaki JFX200-2510

What makes Roland printers so much more expensive than Mimaki?

Mimaki Owners - what daily maintenance do you do on your printers?

Share This Page

Log in / Register

Useful Searches

Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

Mimaki RasterLink 6 - "QuickSets"

Offsign New Member

Solventinkjet Printer Fixers

Offsign New Member

Help, please - Mimaki CG-130 FX - How to read a print file for Cutting from RasterLink6 to FineCut8

Help, please - Mimaki CG-130 FX - How to read a print file for Cutting from RasterLink6 to FineCut8

How to change the ink type on a Mimaki JFX200-2510

What makes Roland printers so much more expensive than Mimaki?

Mimaki Owners - what daily maintenance do you do on your printers?

Share This Page

Support Tickets