Modify Oracal print profile

[Signed Out]

I have been trying to modify oracal's print profile for 3751. We love the profile, prints great, but there is only 1 quality option, 8 pass(high quality). For large trailer wraps we'd like to print at 6 pass (standard), or for smaller detailed graphics we'd like to print it at 16 pass (artistic). We have versaworks, but no other color management software. I haven't been able to find a way to add or change the quality settings to a copy of the oracal profile I made.

Is this possible to do at all if we had different software? Is it possible to do within versaworks?

 

[SIGNTIME]

I Would also like to know this as well.

 

[Correct Color]

Most likely you can't do it.

Typically in Versaworks, differing named settings are not only different numbers of passes, but different resolutions as well.

So while in some cases a driver will let you change mechanical settings such as number of passes or head speed or bi/uni-directional that don't require re-profiling, that's almost never the case in Versaworks.

If you're changing resolution, you need a new profile.

 

[shoresigns]

I seem to recall there's a box you can untick somewhere in the profile that says "Hide non-recommended settings" and that doing so often turns up a few new resolutions.