Move vinyl forward after cut?

[RalphGS]

Is there a way to make Flexi move the vinyl 'x' cm forward after cutting so I can cut off the roll with the knife without manually pressing the forward-button on my summa d60?

 

[ChicagoGraphics]

Doesn't it cut it automaticly

 

[Sign Works]

In Flexi's Rip ...

Driver Options - Select "Advance After Print"

Contour Options - Select "Advance After Plot"

At least this is what works for me on my Roland thermal resin printer/cutter.

Oh Ya, Enter desired "Page Spacing" for desired length of advance.

 

[RalphGS]

I have fleximac and a summa d120r/d60r
the option advance after plot is checked but it doesn't let me enter the lenght (no box to enter it)

 

[signmeup]

I'd like to know too. It advances but not enough. Kind of annoying.

 

[Sign Works]

Open "Driver Options" it is listed as "Page Spacing" there is a drop down menu with options from none to 100mm. I've always got mine set to 10mm just so that it advances a bit after one job so that I can send the next without manually advancing it. I have not experimented to see if you can enter a larger value than the 100mm but will have to give that a try sometime. Also my Flexi version running my thermal printer is 6.6 so newer versions may be different.

 

[RalphGS]

Thanks for explaining but my flexi doesnt have this option v8.6

I cant believe this option wouldn't be a standard option on both the summa and the software