Moving my Mutoh 1204

[custom sign center]

I am going to be moving to another location in town and wanted to know if any of you had some advice, do's and don'ts for moving my printer.
Thanks in advance!

 

[Jeff South Florida]

Clean cap real good. Make sure head is in the low position. Drain the waste tank. Put the head locking bracket back on. Lift machine and try to keep it level. Do not leave without power for more than a day or two.

 

[thewvsignguy]

THIS!

 

[401Graphics]

i moved mine twice about 15 miles. All I did was empty the waste tank (the first time). I forgot the second time, and got ink everywhere!

 

[Mosh]

Just throw it in the truck...NOT lock the head and you should be fine, like the others said power on ASAP! Then crun cleaNING.

 

[GAC05]

All good advice and remember.......

 

[CP Signs]

Same as 401. twice without any problems. I remember your story about forgetting to empty the waste tank,,,,, glad I thought of it. Lol

 

[401Graphics]

I'm reminded of it everyday when I put my boots on and see ink stains on one of them. lol

 

[aaronJREgraphics]

Yeah i have moved my 1614 a few times and we just lock the head and tape the lid down keep level when picking up and power on quick you will be fine just like everyone said the big things are the head and waste tank.

 

[Stealth Ryder]

Lock the head down, move it gently, run a cleaning...

 

[Kerron Hughes]

Recently picked up our 1204 from 260 miles away, move went without a hitch, like others have said - lock head, empty waste tank, keep it level. Now I just need to find out if I can use our old RJ60U Rockhopper 1 inks in the 1204.