Mutoh E075err Sensor

[signexp]

Help! I can't find anything on this site that refers back to this error. I can't get it past the above error. I have replaced both heads, and check and re-checked all the sensors that I can find. I am out of warranty and need to fix this myself. Thanks

 

[elitetech]

I think its the same issue I had with my Mutoh, you need air blower,alcohol and lint free material.
You need to open the cover on opposite side of the head, there you will see a circular plastic round with encoder you want to blow air at that area and clean the circular with alcohol.

 

[signs+banners]

You replaced the heads? I would check the head cables to make sure they are inserted correctly and secured. Also make sure they are not damaged.

 

[signexp]

Yes, I have replaced the heads, are we talking on the head itself that moves or on the opposite side of the printer where the cables are?

 

[GAC05]

This from the 1604 guide

wayne k
guam usa

 

[Compilla]

Help! I can't find anything on this site that refers back to this error. I can't get it past the above error. I have replaced both heads, and check and re-checked all the sensors that I can find. I am out of warranty and need to fix this myself. Thanks

I think you should tell the model of your printer???