Need help finding a product...

[bendeane]

I am printing and installing onto the exterior surface of windows for a client. I need something cheap that can be put up and then in two months, taken down with ease. They don't want perf (it's too expensive for something like this anyway), but it's gotta be something that a monkey could remove without much trouble. Any suggestions?

Climate for the two months will be like early spring midwest, avg high 45-60 avg low 15-30 Fahrenheit.

Thanks in advance...

 

[J Hill Designs]

busmark?

 

[CS-SignSupply-TT]

Do you want to print on CLEAR or WHITE?

 

[MikePro]

banner and suction cups?

 

[CS-SignSupply]

We have a 6 mil product with removable adhesive that may work for you... General Formulations 223 in 54"x100' rolls.

Link here

 

[BigfishDM]

Why not use Static Cling?

 

[petesign]

What about 3m IJ46?

 

[bendeane]

Client isn't interested in static cling. White vinyl, the GF sounds like a good option, I assume at 6 mils I could get by not laminating it. Don't know much about the IJ46. The IJ36 might work. Any other suggestions?

 

[ChicagoGraphics]

3M just came out with a new vinyl product for short term use, but it's a clear film

 

[CS-SignSupply-TT]

Are you ready to order?

Client isn't interested in static cling. White vinyl, the GF sounds like a good option, I assume at 6 mils I could get by not laminating it. Don't know much about the IJ46. The IJ36 might work. Any other suggestions?

bendeane, are you ready to place an order for the GF 6mil?

 

[bendeane]

Are there any thicker films that are gloss? The GF would be great if it were a gloss film. The GF204 could work, but it's not thick enough to apply without a lam in my opinion.

Any thoughts?