Need help identifying/finding chrome trim

[weaselboogie]

I need some help identifying a piece from the attached picture. I'm looking for some 6" wide chrome trim ... maybe flat chromed sheet metal that could be used here.

I've been through Outwater's catalog and can't seem to locate what I'm looking for.... my biggest problem is that I don't know the official name.

 

[iSign]

a client of mine used some very cool looking textured silver metallic laminate, like you would make counter tops with... it was used in a manner similar to your usage, but i don't know where he got it, or if a shiny chrome is available... but maybe it's one more idea to try...

here is the job I'm talking about, under my prints:
http://islandsignmaui.com/2009/10/new-display-at-maui-ocean-center/

 

[signage]

Try a local sheet metal shop that does commercial kitchen work!

 

[Dzrt1st]

It looks like random brushed stainless steel rather than chrome, especially on the right end.

 

[strypguy]

It looks like random brushed stainless steel rather than chrome, especially on the right end.

I agree it looks like stainless steel. Might try some local welding shops. I know ours usually have stainless steel on hand.

John

 

[Zzyzx]

I would check it closer, it may be a chrome wire way

 

[chopper]

kinda hard to tell from that picture, but it looks like it is brushed aluminum,
they use a hand grinder with a wire brush and randomly brush the surface to get the desired look,
it could also be steel or stainless, aluminum is the most commonly used, unless I am just seeing a reflection in the surface ? this was popular in the chipotle restaurants.
//chopper

 

[MikePro]

Buy an aluminum strip, bend to shape and get it anodized... or Chrome spray.