Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

need help printing window perf

Discussion in 'General Signmaking Topics' started by antant77, May 15, 2019.

  1. antant77

    antant77 New Member

    20
    1
    3
    Sep 5, 2013
    Pennsylvania
    Im printing with a Roland VS640 and im printing on clear focus 24 vue window perf... my pinch rollers are making the perf vinyl come off the backing causing ink to smear as my printhead passes over the lifted areas...I am also using my edge clamps...

    anyone have any suggestions to stop the vinyl coming off the backing?

    I also tried turning the heat off
     
    Tags:
  2. crystalcoastgraphics

    crystalcoastgraphics Member

    394
    50
    28
    Sep 30, 2011
    North Carolina
    Try not putting you outer pinch rollers so close to the edge of the media. Can you raise your heads?
     
    • I Appreciate You I Appreciate You x 1
  3. antant77

    antant77 New Member

    20
    1
    3
    Sep 5, 2013
    Pennsylvania
    Thanks for the response! I'll have to definitely try moving them in a bit, I have them about a half inch from the edges... I can raise the head as well... I'll give all suggestions a go and appreciate your help!
     
Loading...

Share This Page

 


Loading...