Need to refurbish Lamintor Rollers

[fresh]

It looks like we need to either replace or refurbish the rollers on our laminator. What do I google to find someone who can mill them locally? I have a US Tech Laminator and I haven't even reached out to them to find out replacement cost or availabilty. I assume its going to be expensive.

 

[cmoist]

I've never used these folks before - just found them when googling. Might be an option.

http://www.jjshort.com/Laminator_Rollers.php

 

[fresh]

I called US Tech, its $1200 per roller to replace. I bought my laminator exactly 5 years ago for $2775. The same model now costs $3350. My partner thinks we should probably just buy new rollers, and I sorta agree.

 

[Jburns]

maybe check with a local machine shop, and see if they offer Milling services- I think a lathe with a sharp blade can do it. they may be able to put a crown on it too...
Also -you can swap them -Upper to bottom and bottom to upper if the lower is in better chape.

 

[dypinc]

I have used these guys before and the did a great job. https://www.a-kornroller.com/index.html

 

[aparat]

you can refurbish the rollers by a company that refurbish offset rollers - they grind the old silicone down and re-siliconize the roller. The cest in our country is about 300$ for a 160cm roller.

 

[rjssigns]

Check here: http://www.rol-tec.com/capabilities/rubber-roller-coverings.php