New to the ROland VS-540

[ScottyAdams]

Hey guys,

So I cut and laminated and reloaded into the printer. Now how to get the printer to scan the crop marks? Read through the manual for the printer and versaworks and cant find anything in either one explaining the procedure. Can someone explain this for me please. Thanks guys!

 

[CS-SignSupply-TT]

Scotty, I tried to find a video on www.rolanddga.com, but was unsuccessful. Go ahead and call 800-542-2307 and ask for technical support.

 

[amw]

Just go into versaworks settings and change it from "print only" to "cut only" and leave everything else the same (you could turn off your heaters also if you want) then with the media relaoded hit "print" again.

The printer will scan for the marks and if laoded right will start cutting it.

Hope that helped.

Marsha

 

[Pacific Coast Sign]

DO NOT hit "Get Media Width" in job settings again this can cause you issues. Just do as amw suggests above.

 

[2B]

If need be get a sharpie and put marks on top on the lamination the same size and location of the crop marks if the machine has issues reading them