We sold our used Latex printer to a sign shop - The guy shut his doors down during covid, and bought the printer a year and a half ago to get back into it, since all his printers (5 of them..) are solvent, and were put away into storage without proper draining... We still have the printer in our warehouse after a year and a half.... He pays us to run his stuff, and pays a storage fee on the printer because when he went to rent a new shop, he saw they were 4-5K a month now... real estate has gone up. Just a little back story to show how the guy is...
So he tells me this big company wants a bunch of their windows wrapped, and he wants me to print it all for him and go install it with him since he cant install it by himself...so I said fine. That was 2 months ago - he sends me this 1 MB JPG artwork.... And says its for the windows. I open it up and it's like 10" x 20". I didn't reply or anything.... a week goes by, and he calls me when I'm in a restaurant and can barely hear him... Asking if I printed it yet. I was confused...and asked if it was the 10" x 20" file... And asked how big the windows were... he said there was 10 of them and they were roughly 3 FT wide and he doesn't know how tall... so I said I cant print them based on that information...and I needed measurements of every window, as well as the mullions inbetween so I can setup the print and do the artwork. He calls back after going to the site... And says the window is 36" and something and 48" and something tall roughly" So I tell him "roughly" doesn't work.. That its a big image spanning across 10 windows, and I need to know exact size...and mullion...and he says he'll call the customer and get him to measure. Then without getting me new dimensions... he calls yesterday and asks if I printed it yet....
I told him, I needed real measurements... I wasn't going to print a file, drive an hour and hope it works for a multi million dollar company.
I got an E-mail today, with this image - No measurements, nothing - It's not 10 windows, it looks like 2 windows... The kicker is that there's a measuring tape right in the corner. So I text him asking if he got measurements.... And he calls me again and asks me what measurements I need and why i cant just print it based on this photo....
This is a sign guy thats been in the industry for 20+ years. I don't know how he ran his company, I don't know how he has these big clients, and why they haven't just dropped him... He's polish, and has a very thick accent and is hard to understand, so I try to only communicate through text and E-mail... But he follows it up with a call everytime, even when I say I'm out, please just text or E-mail me the dimensions so I have record of it since I dont have a pen... He'll just call back and give me these random dimensions that make no sense.
I can see why some customers are idiots, or dont understand things... so I just wanted to post a sign maker being one!
View attachment 167581