Need Help Onyx 21 Rip

[Caren Hines]

Good morning,
Does anyone know if there's a way to change the feed (direction-barcode) on the prints, Onyx rip cut file.
I want to reverse those, to have have the back code arrow be the front and print back to back without having to print separately Because as you know you need more on the backend then the front of the print.
I hope I said it to wear it makes sense.
Thanks in advance.
Caren

 

[balstestrat]

What cutter do you have? All those settings depend on the cutter.
Go to the main menu -> Cutter settings -> Select your cutter -> Configure.

I've got to say, I didn't completely understand but maybe someone else does.

 

[Caren Hines]

When you do a print on the HP L570 or whatever printer you have. The print starts the barcode, and the arrow pointing forward I am trying to reverse the barcodes .
So the arrow in front of the barcode is ^ I want to flip it so the end barcodes is up front be v

 

[Caren Hines]

What cutter do you have? All those settings depend on the cutter.
Go to the main menu -> Cutter settings -> Select your cutter -> Configure.

I've got to say, I didn't completely understand but maybe someone else does.

I have a Graphtec 8000 but, A Onyx Rip. When the print starts the arrow is and barcode is ^ I am trying to reverse it so the arrow at the end v is at the front of the print

 

[CanuckSigns]

you can load the files into your cutter backwards without issue, you just have to use the rotation drop down in cut server.

 

[Caren Hines]

you can load the files into your cutter backwards without issue, you just have to use the rotation drop down in cut server.

Thank you, But I take it there's no way to switch it on the print?

 

[balstestrat]

Thank you, But I take it there's no way to switch it on the print?

If it's not in this menu then no, not possible.
Main menu -> Cutter settings -> Graphtec 8000 -> Configure.

 

[unclebun]

Can't do it at the RIP end. But running the print through the plotter backwards is easy. That can be done either from cut server (easiest) or from the cutter front panel (very arcane and you have to remember to undo it for other jobs).

 

[Rollout]

Thank you, But I take it there's no way to switch it on the print?

If you have found a way to do this, I would also love to know...

 

[V. V.]

No way to do so in 21, 22+ only