O's not closing

[thomchar]

We have a roland cammi 1 cx-24. The problem we are having some letters such as the O & Q & other parts of the design that are not straight lines are not connecting for a clean cut. Any help you can give us will be greatly appreciated. Thanks Charlotte

 

[dakotasignwerks]

what software are you using? could be in it.

 

[gabagoo]

If it is just happening and worked ok before it could be the blade or the cutting strip. Not sure about your plotter.

 

[thomchar]

We are using Sign Lab 7.1 & we changed the strip & put in a new blade.

 

[jiarby]

When that happened to me on my CE5000 Graphtec we had to grease the cutting head where the shaft slides up & down (there's a spring in there too)

the gap was because friction was keeping the blade from going down fast enough.