pan face removal

[nashvillesigns]

i have three cabinets to change out the standard pan faces. Not to sound like a moron, but, there are NO bolts, screws or any type of fasteners on the cabinet edges. the cabinet in anodized aluminum 4" box.
My question is, how exactly do i get these out? they are 3'x7' in size..
(so, should i hire Tom Riddle?)
thanks
chris

 

[FS-Keith]

pics?

 

[signguy 55]

Sounds like you may have to remove from the top. There has to be some screws somewhere. It will be more aggravating, but 3' x 7' won't be too bad. Or it may be a hinge type, that's aggravating too.

Once I had 2 8' x 12' faces my installer had to remove and reinstall from the top about 20' up in the air. He had to go 30' just to get it to slide it on a windy day. I felt sorry for the guy that day.

 

[J Hill Designs]

face might hinge out and come completely apart for face removal. Ive had a few like that, and let me tell you, they are a PAIN to deal with

 

[Billct2]

What JHill said

 

[Techman]

ya, what he said. The holder strips are strongly spring loaded and often been too long since they were last operated. That makes them stiff. It may be a top loaded can. But, like the unicorn I have never personally observed one.