miguelon.lizarraga
New Member
I have a customer who needs 150 posters printed, size 2x4 feet. Any recomendations of what material to use? Does fellers carry any of it? They want it kind of thick if possible. If not any options would be awesome!
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Poster Printing Paper Recomendation
- Thread starter miguelon.lizarraga
- Start date
Jet Fast Printing
New Member
We use Sihl TriSolv 200, never had a complaint. Not sure Fellers has it, Nazdar does.
bayshorecreations
New Member
+1 for Sihl
Letterbox Mike
New Member
thewood
New Member
insignia, what don't you like about the Postermax specifically? Sihl Trisolv was the first paper I tried years ago, and I never could get satisfactory results from it. It looked great coming on the printer, but half an hour later it seemed as though the inks "soaked into" the media leaving a washed out print. I recently started running the Postermax with much better results. Although, I have to print it at a high resolution which is really slow. I'd be interested to hear your opinions/results on both materials.
As a very cool alternative, we used to use a product called iVivid Pearlescent Photo Film for poster-type jobs. It has an incredible sheen too it that really makes the images pop. Here's a link to the mfg site if you're interested: http://www.ivivid.net/productDetail.php?productid=87
Letterbox Mike
New Member
I think our results are exactly opposite yours. For us the Postermax looks really washed out no matter what we've tried. I didn't have a profile built for it but we did use a stock profile from Magic and it wasn't any better. Just very flat, dull, "soaked in" looking. On the other hand, the Sihl prints really pop, they don't look dull or washed out. For the sihl, we actually use a 720x720 Oracal 3651 profile, 8 pass bidirectional, not super fast but not painfully slow and it prints well. Mimaki JV33 and JV3 by the way.
Brandon708
New Member
thewood
New Member
Wow, that's strange. I was printing both the Trisolv and Postermax at 720x720, 16 pass bidi on a Mimaki JV3 and still couldn't get good results with the Trisolv. The Postermax isn't perfect by any means. At what temp(s) are you printing?
Letterbox Mike
New Member
We're running a totally unmodified Orajet 3651 720x720 8-pass profile, I think the heat on the JV3 is 45/40 in the profile. Try it if you have some sitting around, it's worth a shot. We also use the 3651 profile on our JV33.
Heck, we've actually run a lot of posters with that profile in 4-pass bidir on both printers. It gets a little bandy if there are a lot of solid colors, but for posters that are mostly photographic images, it actually printed fine with no noticeable banding at all.
Heck, we've actually run a lot of posters with that profile in 4-pass bidir on both printers. It gets a little bandy if there are a lot of solid colors, but for posters that are mostly photographic images, it actually printed fine with no noticeable banding at all.
bob
It's better to have two hands than one glove.
I use the InteliCoat Indoor/Outdoor poster paper for solvent printers from Fellers. It prints every bit as well as any other media of any sort that I've ever used. I tried some product or another from Sihl that was recommended by some vendor or another and the best I could achieve with it was an anemic washed-out print.
Whatever you settle on, DO NOT use photo paper for this application. With the sizes you're citing, photo paper is a miserable mess to wrangle without cracking the the surface coating.
Whatever you settle on, DO NOT use photo paper for this application. With the sizes you're citing, photo paper is a miserable mess to wrangle without cracking the the surface coating.
Sticky Signs
New Member
miguelon.lizarraga
New Member
Thanks for all the suggestions! I will see what my customer says tomorrow and than order some 
