Print on the adhesive side of material?? For window install

[Graphics2u]

Does anyone here make decals that are printed so that they can be read from the outside of the window but are installed on the inside of the glass? Please point me to a merchant Member who can do this.
Only need 3 for a hospital?

 

[Letterbox Mike]

PM me your specs, we do these all the time!

 

[baxter gamble]

We print this too

 

[Graphics2u]

PM me your specs, we do these all the time!

Will do! Thanks.

 

[GoodPeopleFlags]

I think you just print the decals normally on regular vinyl then apply a laminate that has adhesive on both sides. The "outside" or "top" of the laminate has a liner that covers up the adhesive. Apply the laminate to the vinyl then peel off the liner on top of the laminate to expose the adhesive when you're ready to install.

 

[d fleming]

Print reverse on clear, lam with white vinyl.

 

[gnemmas]

Print on clear vinyl in mirror image (reverse), then laminate with white.

 

[Mosh]

Just print it reverse on clear film and apply white over the top like you would normal laminate. Simple to do.

 

[JR's]

Print reverse on clear, lam with white vinyl or print white.

 

[d fleming]

+5

 

[GoodPeopleFlags]

Or you could just print on clear and laminate with white. Did anyone mention that yet?
:Big Laugh

 

[petepaz]

if i were you i might try printing on clear, reverse print and laminate with white viynl
let me know if that works

 

[Graphics2u]

Could I just print on Clear in revese and then laminate it with white?

 

[d fleming]

Could I just print on Clear in revese and then laminate it with white?

I'm with Pat, that'll never work.

 

[Graphics2u]

Funny thing is I only asked for someone who could do it. I know I can do it myself, I just don't have any white vinyl that has a clear adhesive at the moment. It all has grey adhesive. I need some 3640 anyhow, I'll just order it in and follow everyone's suggestion.

 

[jiarby]

Old Paint sez:

Back in my day we'd just reverse paint it on clear then slap a coat of white on there.

FYI:

Plain old 651 has clear adhesive.

 

[showcase 66]

We print this too

Out of curiosity.
Do you do it this way because it is so fricken cold in Alaska. This way you get to install inside where it is warmer.

 

[jmb474]

I think I would print on clear and back it with white. Hate to be in the minority. lol

 

[wes70]

OK folks! Let me get this straight! You print white on clear with a... oh f**k it! I'm gonna sub it out to China!

 

[omgsideburns]

Print reverse on clear with a white flood..

 

[JERHEMI]

What clear vinyl you using?...Actually, those of you with a Mimaki what clear vinyl are you using? Thanks

 

[ionsigns]

Jeez...why didn't someone mention this already!?

Print reverse on clear, laminate with white vinyl or print white.