Need Help Printable Vinyl for Outdoor Bicycle Repair Kiosk

[jmmccann]

The customer has 3 painted steel outdoor bicycle kiosks that riders can use to repair their bikes. I'm looking for a print compatible vinyl and laminate that will stand up to weather in Ontario Canada, and a little bit of abuse. Orafol recommended standard 651 with 210 laminate? I've definitely used this before but I'm wondering if this will be strong enough. Thoughts?

 

[Dan360]

Standard vinyl combos work just fine in Ontario, we use IJ35 and haven't had any issues.

 

[Jburns]

I am surprised Oracal recommended that!
I would use Cast Vinyl and Cast laminate dude...

 

[GaSouthpaw]

I am surprised Oracal recommended that!

Me, too- that's not a print vinyl, and that's certainly not a long-term laminate.

I would use Cast Vinyl and Cast laminate dude...

Agree here, too. I prefer 3M- so I'd suggest IJ180 or IJ8624 (depending on the surface finish of the paint) with a compatible laminate.

 

[jmmccann]

Me, too- that's not a print vinyl, and that's certainly not a long-term laminate.

Agree here, too. I prefer 3M- so I'd suggest IJ180 or IJ8624 (depending on the surface finish of the paint) with a compatible laminate.

The paint is glossy.

 

[Odilian Gosselin]

I think a normal vinyl is the best choice.