-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Profil creation with Digital Factory DTF edition
- Thread starter diltech
- Start date
Graphic Extremes
Knows To Little
you can create your own profiles for any printer that I have seen so far.
Graphic Extremes
Knows To Little
You have to buy an add on for Digital Factory, they say you can just use x-rite to make a profile and use it in Digital Factory
if you go to their website, and look under modules you will see IC Profiling it list for 895.00 or just try and do it with the X-Rite and use the profile it generates
www.cadlink.com
if you go to their website, and look under modules you will see IC Profiling it list for 895.00 or just try and do it with the X-Rite and use the profile it generates
DIGITAL FACTORY - Fiery Specialty Production
More than just RIP software, Digital Factory offers high fidelity color printing and professional job preparation and management tools to streamline your production workflow from start to finish.
www.cadlink.com
hybriddesign
owner Hybrid Design
We have TXF 300s, cadlink and an x-rite as well. We made some profiles in a demo of Printfactory and it worked pretty well but we just haven't had time to keep up and actually use them so we're back to digital factory. Printfactory did seem to have a little wider gamut but the workflow was a little confusing. It's $89 or $99 a month or something and can do automated half tone printing.
btw, how is your TXF holding up? We have two and one is a workhorse but throws fits some days and the other has been down for half a year.
btw, how is your TXF holding up? We have two and one is a workhorse but throws fits some days and the other has been down for half a year.
diltech
New Member
Hi,
We have the TXF-300 here. Everything is going well, our six-month acquisition. We already have five Mimaki machines here for sublimation and other printing, and I know them well. We only had one problem at the beginning, but it was a problem with the dampers, and Mimaki replaced them with a technician very quickly. Otherwise, we have a fairly consistent production, and it's important to always do the recommended maintenance.
We have the TXF-300 here. Everything is going well, our six-month acquisition. We already have five Mimaki machines here for sublimation and other printing, and I know them well. We only had one problem at the beginning, but it was a problem with the dampers, and Mimaki replaced them with a technician very quickly. Otherwise, we have a fairly consistent production, and it's important to always do the recommended maintenance.