iSign
New Member
it's been so long since I had to set up the software to recognize my devices on their respective ports... and I'm no wizard at that sort of thing... so I just thought I should go see what port names are selected for the devices currently.
There is only one parallel port, and two serial ports..
Basically, anything I could learn before reformatting, that I will need to know, or figure out to get things running again, is what I want to try to prepare myself for.
Once I have time, I'm planning to post an ad here before ebay, and planning to try to offer some additional incentives that might make my equipment rise above other similar offerings (if there are any running at the same time,... in the next week or two, I hope) ...offerings such as some clip art collections i no longer use... and possibly my entire collection of every Signcraft from issue one, to current..
If you are wondering at this point, I am still in business... but after doubling the size of my shop when I took the plunge into CNC ownership (in 2008
) I've been in downsize mode for the last year, and as of the first of this month, another increment of sacrifice of commercial space has occurred, so I want to cast off excess baggage, in hopes of staying afloat, or possibly considering more dramatic changes, but with the hope it could always be on my terms, if i make enough sacrifices, soon enough... but i digress...
anyone care to share any insights as to locating where my setup choices for the way things are, so I will be better prepared to choose correctly when attempting to reconfigure everything such that it works?
There is only one parallel port, and two serial ports..
Basically, anything I could learn before reformatting, that I will need to know, or figure out to get things running again, is what I want to try to prepare myself for.
Once I have time, I'm planning to post an ad here before ebay, and planning to try to offer some additional incentives that might make my equipment rise above other similar offerings (if there are any running at the same time,... in the next week or two, I hope) ...offerings such as some clip art collections i no longer use... and possibly my entire collection of every Signcraft from issue one, to current..
If you are wondering at this point, I am still in business... but after doubling the size of my shop when I took the plunge into CNC ownership (in 2008
) I've been in downsize mode for the last year, and as of the first of this month, another increment of sacrifice of commercial space has occurred, so I want to cast off excess baggage, in hopes of staying afloat, or possibly considering more dramatic changes, but with the hope it could always be on my terms, if i make enough sacrifices, soon enough... but i digress...anyone care to share any insights as to locating where my setup choices for the way things are, so I will be better prepared to choose correctly when attempting to reconfigure everything such that it works?
