Roland PNC-1000

[Silverado]

Hello...

I'am looking for the plastic blade holder adapters that attach the cutting blade holder to the carriage.

Anyone have any extras for sale or know of where is can get them??

Thanks you..... Roger

 

[Cadmn]

try the Roland site. you should be able to get them there.

 

[Silverado]

try the Roland site. you should be able to get them there.

Hello CADMN...

Spoke with Roland they no longer have parts or sevice for this old machine.

I hope someone out here still has one of these old machines and knows where to get them.

Wish me luck!

Thanks...... Roger

 

[THATgirl]

Roger I will check to see if I have an extra. I use my old roland as a back up so if I only have one....I won't want to give it up.

 

[Silverado]

Roger I will check to see if I have an extra. I use my old roland as a back up so if I only have one....I won't want to give it up.

That would be GREAT!!!

So you know the machine is useless without it.

Keep in touch!!

Thanks....

Roger

 

[Cadmn]

Roger I run a PNC960 & they had parts for it & its older than the 1000 most the pens are compatable with Houston Instruments. If ya can't get one you may have to have it made

 

[Silverado]

Roger I run a PNC960 & they had parts for it & its older than the 1000 most the pens are compatable with Houston Instruments. If ya can't get one you may have to have it made

Thanks for the info. I'll keep that in mind.

.....Roger

 

[Ian Stewart-Koster]

Did you break the old one? Superglue?
Other models may have the same holder.
Ebay is a good source- or put a wanted ad here for a nonworking Camm1.

 

[Silverado]

Did you break the old one? Superglue?
Other models may have the same holder.
Ebay is a good source- or put a wanted ad here for a nonworking Camm1.

Lost It.

Checked Ebay... Nothing.

Waiting to hear back from "THATgirl".

Thanks!

 

[THATgirl]

Hi Roger....yes I have one for you. Email me at seattlesigns@yahoo.com with your address and I will get it sent to you tomorrow.

 

[Silverado]

To THATgirl...

Thank you soooo much - Please check you email.

....Roger

 

[Silverado]

Roland Blade Holder Adapter

Thanks everyone...

"THATgirl" I sending me one!!

...Roger