Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Question Roland SC-545EX Service Menu Vertical alignmwent

Discussion in 'Digital Printing' started by Kevdmil, Mar 23, 2019.

  1. Kevdmil

    Kevdmil New Member

    2
    0
    1
    Feb 16, 2019
    Sun City, CA
    I can find bi-directional alignment all over the internet. I can not find the correct procedures for vertical alignment through the service menu.
    I'm in the service menu. I just need the correct procedures for the vertical alignment.
     
    Tags:
  2. FrankW

    FrankW Very Active Member

    1,324
    135
    63
    Oct 19, 2008
    Germany
    Print the test for the vertical adjustment out of the head adjust menu, and if the heads are not at the same height, loose the 3 screws a little bit which fixes the head and turn the screw in front of the head with the white plastic knob to adjust the head. Sometimes, at older printers, the printhead pen plate stucks a little bit, could be hard to loose it.
     
  3. Kevdmil

    Kevdmil New Member

    2
    0
    1
    Feb 16, 2019
    Sun City, CA
    Thank you. I just refurbished an old printer someone gave me. It's now printing like new. The alignments were the last thing.
     
Loading...

Share This Page

 


Loading...