Roland Sheet Cut

[bmep]

Has anyone experienced hitting the sheet cut button after printing has finished and nothing happens. Hopefully I've just missed a setting somewhere on my sp540v.

 

[signheremd]

We have the XR640 and you hold the Sheet Cut buttom for 2 seconds and it beeps and then proceeds to go across the vinyl and cut it on the way back

 

[bmep]

Yes have tried that a few times. Still nothing...

 

[netsol]

Bad sensor of some sort. Perhaps the cut carriage ribbon cable

 

[netsol]

I imagine I would press setup again and do sheet cut once it is initialized

i will look if I have a service manual

 

[bmep]

I had a power surge that took out main board. I replaced the board and everything works good except sheet cut. Possibly the cut carrige board got hit also ?

 

[Rmurray321]

I had a power surge that took out main board. I replaced the board and everything works good except sheet cut. Possibly the cut carrige board got hit also ?

Sounds like you need to hit up the insurance company

 

[cornholio]

Do the limit initialize