Roland SP 300V sq ft p/hr

[njsigns]

I was wondering if anyone can tell me what the Roland SP 300V sq ft p/hr is on:

720x720?
720x360?

How about any other common settings I am missing? I see that they claim 1440x1440, but in Versaworks I only see 1080x1080 as the high quality settings and it seems greyed out to change it. Am I missing something?

I can only seem to find info on the 540V for some reason.

Thanks,
Gene

 

[ChiknNutz]

Here is the page you're looking for.

http://www.rolanddga.com/color/prod...sp?menu=FEATURES&submenu=7&nxt=2&totsubcnt=15

FYI, I get exactly DOUBLE the rated output speed on my 540V...64 SFPH at 720x720 8-pass mode. This is directly related to the RIP, ink and media profiles I am using. While this isn't very fast at all by many standards, every bit helps at the entry-level!

 

[njsigns]

Thanks Chris,

I posted the same question at printingdigital, and got the same response. This sentence totally throws off my thinking - "The SP-300V prints at up to 63 square-feet per hour." Then the chart starts off by saying 114 sfph. Is this only confusing to me? In my mind, "up to" means the maximum.

I guess knowing that your 540V prints at 64 sfpr in standard mode certainly helps me believe that chart is for the 300V. I can't believe Roland words the paragraph that way, I find it totally misleading, I guess in a good way (for me). I've gone back and read that same thing 50 times and it still doesn't make sense to me... I also find it totally off the wall that I can't find anything about this in the manual.

Thanks,
Gene

 

[mediaman]

The chart appears to be for the SP-540V