roland sp540 orajet3165

[graphix]

hello when i use the generic (default profile) and print on orajet 3165 the ink looks liks it is seperating like little swirls or like seperating the color like it is cloudy looking what is causing this...thanks tim

 

[spectracolor]

a picture might help.

I also use GCVP instead of Generic and comes out great.

 

[Sign Works]

a picture might help.

I also use GCVP instead of Generic and comes out great.

Ditto on the GCVP profile.

 

[SignsOfMaine]

maybe a dumb question, but did you touch the print stuff before loading it at all? Dunno if you've been printing for 10 years or 1 week. Anyway don't touch it, I used to think "wtf is making those patterns?" and I realized it was palmprints

I have used both GCVP and generic and they both work great, generic is a little better for some things I've found. Don't know that it's your profile. If you can find a profile where it doesn't happen, I guess use that. But if it's always happening, maybe something's gotten into your inks? Run a print test.

 

[Digitall]

finding that the different air release patterns on back of vinyl tend make prints look different,especially with oracal. the thinner the mil the more diversity.

 

[graphix]

pic

i am very new to this printer gcvp was the profile i used, i printed the roland test swatch file,they all look the same milky, i'll try and post a pic oh and i use jersey cotton gloves handling this vinyl...thanks tim

 

[graphix]

i am very new to this printer gcvp was the profile i used, i printed the roland test swatch file,they all look the same milky, i'll try and post a pic oh and i use jersey cotton gloves handling this vinyl...thanks tim

well i was printing something out and i ran out of number 3 ink,dang..to beat it all the ink priming bottle is over half full,,not much printing going on here....