-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Roland Versa Camm VP-540
- Thread starter dlndesign
- Start date
Replicator
New Member
Are you adding CROP MARKS as well as the cut lines named : CutContour ?
vectorterrorist
New Member
Are you using versworks at all with your program? For mine I had problem too and needed help...but if I was you I would use thr rip program that goes hand in hand with your machine and then use the roland (magenta) swatch to add your cut lines-
is this something that didnt happen from the get go or did you try it for the first time and it's not working?
is this something that didnt happen from the get go or did you try it for the first time and it's not working?
dlndesign
New Member
I am using Versa Works, and I had used the Cut Contour Swatch, but no go.
Also, I have come across another issue. When Adding a contour cut line to a complicated graphic, with both inside and outside of the graphic, cuts.
Why when you ask Flexi to do a Contour cut line, does it only grab the outside of the graphic? Is it a type of grouping, am I not converting it all to curves? Because I had to go through the process 3 times to make sure that I had access to all my vectored lines that needed to be cut.
Also, I have come across another issue. When Adding a contour cut line to a complicated graphic, with both inside and outside of the graphic, cuts.
Why when you ask Flexi to do a Contour cut line, does it only grab the outside of the graphic? Is it a type of grouping, am I not converting it all to curves? Because I had to go through the process 3 times to make sure that I had access to all my vectored lines that needed to be cut.
Roland Crop Marks
You can use FlexiSign to set up crop marks and contours; as for the inside shape cut lines, you have to select "with holes" in the contour menu. Not the Arrange>contour menu.
Also! If you are using gloss vinyl or laminate you may eed to cover your crop marks with something matte finish; matte laminate works well or even etchmark.
You can use FlexiSign to set up crop marks and contours; as for the inside shape cut lines, you have to select "with holes" in the contour menu. Not the Arrange>contour menu.
Also! If you are using gloss vinyl or laminate you may eed to cover your crop marks with something matte finish; matte laminate works well or even etchmark.
Last edited: