• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Roland VS420 Ink

Michael Snook

New Member
Hello,
I have a Roland VS420, each time I get to use it, it has excess Yellow in the print and often a blob of Yellow drops onto the print.
No problems after it’s been in use and ink gets used.
Any ideas why I keep getting this?
Please see pictures attached.


Thank you.
 

Attachments

  • ACC1721D-E75E-4751-971B-F22DE81C8446.jpeg
    ACC1721D-E75E-4751-971B-F22DE81C8446.jpeg
    1 MB · Views: 212
  • 672B566D-8CAF-4091-9673-9BED564C8B26.jpeg
    672B566D-8CAF-4091-9673-9BED564C8B26.jpeg
    1.1 MB · Views: 174

Michael Snook

New Member
Thank you for your advice.
It is new head and Capping fitted two weeks ago. I have just lowered to Capping and so far so good.

Fingers crossed. I will see what happens tomorrow...
 

premiercolour

Merchant Member
You want to make sure the printhead itself is periodically cleaned like once a week minimum. There might be dust gathering around the head and the more you print, the ink will drip onto the material. Clean with swabs and cleaning solution.
 
Top