Routing Bits for Zund

[Marty Thompson]

Hello,

We are wanting to route into wood with different router bit profiles. We have a Zund with the router toolchanger. The types of bits that Zund offers have limited profiles and when we spoke with them they said that we would have to get custom bits made. Does anyone have any suggestions on where we can get these bits?

 

[Christian @ 2CT Media]

Onsrud has quite a few metric shank bits

 

[John Miller]

I get my bits from Tools Today. I'm in CT, they are in NY. One day shipping free.
www.toolstoday.com

 

[Grizzly]

Do you have the 1 kw router? If so, I haven't found a solution either because it has to have the stop ring to hold it in place in the ARC changer. If you have the 3.6kw router you can use anybody's bit as long as it has the right shank diameter for your collet.

 

[Devon19515]

Ballewsaw.com

 

[Bly]

Do you have the 1 kw router? If so, I haven't found a solution either because it has to have the stop ring to hold it in place in the ARC changer. If you have the 3.6kw router you can use anybody's bit as long as it has the right shank diameter for your collet.

You can use any bit with a 6mm shank - you just have to do the bit change manually through the front panel.