• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Royal Sovereign rsc1401c laminator only runs in reverse

T

tjm2

New Member
I have a Royal Sovereign rsc1401c laminator that only works in reverse. I am not able to increase speed in order to activate forward movement. Any suggestions?
 
tbullo

tbullo

Superunknown
It could be a switch on the pcb board. There are 2 of them (blue rectangle), 1 for forward and 1 for reverse. Take back cover off and you will see the board. You can hear (and feel) them engage when you press the button. I'd check that first. I just got my board back from being repaired from that smoked resistor.
 

Attachments

  • 0408251011_HDR.jpg
    0408251011_HDR.jpg
    1.9 MB · Views: 2
T

tjm2

New Member
tbullo said:
It could be a switch on the pcb board. There are 2 of them (blue rectangle), 1 for forward and 1 for reverse. Take back cover off and you will see the board. You can hear (and feel) them engage when you press the button. I'd check that first. I just got my board back from being repaired from that smoked resistor.
Click to expand...
Did the speed light move when you pressed the speed button before the repair?
 
You must log in or register to reply here.
Top