-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
S40600 is amazing!
- Thread starter Kelcy Deeds
- Start date
myront
Dammit, make it faster!!
CanuckSigns
Active Member
You can see the filter in these pics, the charcoal filter lays on the ground underneath the printer to collect the fumes, and the fan is mounted to the wall, if needed you could add some ducting off the fan and direct it out the room, but this works very well for us.
rjssigns
Active Member
Nice! Love the DIY and it didn't cost a fortune.
jfiscus
Rap Master
If you've been to a demo and seen one run then you've smelled one run.
We are used to multiple solvent / eco-solvent printers running here so after a couple days we've never noticed it again.
CanuckSigns
Active Member
We run ours in a 16'x25' room with 9 foot ceilings, if we are running heavy coverage I can't spend more than about 15 minutes in the room without getting a headache, ever since I installed the air scrubber I havn't had that issue again. In our last shop the printer wasn't in it's own room just out in the open in a 2800 sq/ft shop and I could smell it but it didn't give me headaches, but clients always commented on the smell when they came in.
Our air scrubber doesn;t vent outside, so if you start noticing the smell it's a very easy solution that doesn't require putting a hole in your building.
Kelcy Deeds
New Member
Kelcy Deeds
New Member
.
Gave it a shot - it's way worse. We used to just open a door. With this fusion breath fan + filter it just seems to shoot the stink all over the shop, way way worse.
I'll have to see if I can vent outside, that might help :/
jpescobar
New Member
I would like to take part to the thread seeing the plenty of opinions. I'm planning to buy my first wide printer and I'm hesitating which brand and model I will pick at the end.
After two years searching and discussing with resellers, watching many printers in actions, I've put finally 2 models and I will choose one of them.
My first choice was the Epson SureColor SC-S40600 which is a workhorse machine, very reliable with a stunning quality. I print all sort of applications : from vinyl including stickers, perforated and backlit, papers, posters, wallcovering, vehicle wrap...
The problem is the vinyl cutter, I don't have enough money to buy a wide format cutting vinyl so I'm forced to pick a Roland GS-24 which is not productive but will allows me to cut small medias like flex, direct cut vinyls and stickers/labels printed on a 600mm vinyl roll which is not easy to find.
Or I can go for a HP Latex Print & Cut solution 335, I saw it in action in an exhibition hall and I was dazzled by the quality on a wide media delivering high quality application especially textile. This combo solution comes with the latest SAi FlexiPrint & Cut RIP software, really amazing with powerful and nice features. The vinyl cutter which is a Summa D160-R rebranded under HP Latex 64 Cutter is fast and accurate, just load the vinyl into the cutter which will read the unique barcode and procede to the cut automatically.
HP unlike Epson offers users nice services like HP Signage and WallArt suite for designing many applications, HP PrintOS (Print Production Operating System), HP Media Locator to find the medias suitable with you printer and the products you want to print, a knowledge center, an after sales service... Absolutely all the tools a user need to achieve all kind of high quality products are at his hands.
After two years searching and discussing with resellers, watching many printers in actions, I've put finally 2 models and I will choose one of them.
My first choice was the Epson SureColor SC-S40600 which is a workhorse machine, very reliable with a stunning quality. I print all sort of applications : from vinyl including stickers, perforated and backlit, papers, posters, wallcovering, vehicle wrap...
The problem is the vinyl cutter, I don't have enough money to buy a wide format cutting vinyl so I'm forced to pick a Roland GS-24 which is not productive but will allows me to cut small medias like flex, direct cut vinyls and stickers/labels printed on a 600mm vinyl roll which is not easy to find.
Or I can go for a HP Latex Print & Cut solution 335, I saw it in action in an exhibition hall and I was dazzled by the quality on a wide media delivering high quality application especially textile. This combo solution comes with the latest SAi FlexiPrint & Cut RIP software, really amazing with powerful and nice features. The vinyl cutter which is a Summa D160-R rebranded under HP Latex 64 Cutter is fast and accurate, just load the vinyl into the cutter which will read the unique barcode and procede to the cut automatically.
HP unlike Epson offers users nice services like HP Signage and WallArt suite for designing many applications, HP PrintOS (Print Production Operating System), HP Media Locator to find the medias suitable with you printer and the products you want to print, a knowledge center, an after sales service... Absolutely all the tools a user need to achieve all kind of high quality products are at his hands.
I call bs on you smelling latex printer. We have our latex running 5 hours a day minimum, and unless your are right in front taping the media to the take up, there is 0 smell. My Roland VG640 smells like death after only 5 minutes of printing....
The latex smell is from the vinyl heating, not the inks. When you use a wide variety of media you're bound to get some that smell.
For us.. 3M doesn't smell but banners seem to. Avery had a little bit of smell... But nothing compared to our solvent machines.
Thst is correct but nowhere near the stench of solvent. Ikarasu, your owner take out another mortgage, or is he sleeping on your couch and running the one in your basement?
CanuckSigns
Active Member
Another great thing about the Epson machines, they have the best take up system I've ever seen, printing a few full rolls today and the take up tracks 100% straight and true, my previous Roland machines take up's were good (except my Pro 4, that thing had a horrible take up!) but this one is absolutely perfect, no issues running jobs overnight if need be.
Attachments
jpescobar
New Member
I agree with you that the new SureColor SC Series are a well built machine, the take-up system is accurate as the colors are but what about the versatility ? I mean can you print on a large substrates and laminate immediately like the HP Latex ? You need at least 6 hours for degassing and if you have alot of jobs to deliver same day it's not really productive. The ink waste is also a con in eco-solvent machines that will cost you thousand bucks per year.