Sign Bracket

[B-RAD Graphics]

Anybody know what the true term for a bracket that holds 1/2inch sign board on say a 4x4 post..like an L braket but has the channel that runs the length of sign.

And who sells them...which I am sure I can find once I know the real name of them..

 

[Finishline Signs]

Sorry wrong item.

 

[AUTO-FX]

http://www.harborsales.net/tabid/130/Default.aspx?ProductTypeId=177

 

[B-RAD Graphics]

http://www.harborsales.net/tabid/130/Default.aspx?ProductTypeId=177

thanks auto fx..but Im looking for the style that a 1/2 sign board fits into between to post and screw right into and the bracket screws rt on the inside of each post. Looks clean...I used to rout the a 4x4 and slide in..but the bracket is much easier cleaner. But when i call a suplliers they seem to have no idea what i am talking about..yret I see them all over the place..

 

[petesign]

Are you talking about angle iron? You screw two pieces to the sign you are making, and then screw both pieces to the post.

 

[SignManiac]

U-channel would work.

 

[Billct2]

We use two pieces of steel or alum angle.

 

[B-RAD Graphics]

U-channel would work.

that sounds like what it would be called..was drawning a blank..they are sold that way...fits a 1/2 inch sign perfect.. thank you guys!!

 

[AUTO-FX]

http://www.harborsales.net/tabid/130/Default.aspx?ProductTypeId=14&ProductFilter1=U+Bracket#Product

 

[B-RAD Graphics]

ok.. ..so dummy me I guess it would be and L bracket.. But the ones I have seen are premade...Flat stock with 2 L brackets to slip sign rt into and just screw it bolt wat ev and its done...

 

[B-RAD Graphics]

http://www.harborsales.net/tabid/130/Default.aspx?ProductTypeId=14&ProductFilter1=U+Bracket#Product

okay getting warmer..lol..okay it is like those but much much longer...if it was a 4x8 sign..the channel would be 4'... thx guys

 

[MikePro]

U-channel would work.

+1. Got a break? Can bend your own out of a 3" x 4' strip of .090 and even preapply vinyl or paint to match

 

[petrosgraphics]

they are called post clips... come in 3/4" and 1/2" ..... all alum. painted white. real nice..

i have been getting them from NEPCO PRODUCTS CO. E. PROVIDENCE, RI.

1-800-327-7562

 

[Sign-Man Signs]

Metalcraft Industries, Florida. Talk to Kevin.
http://www.metalcraftindustries.net/

 

[SignLogic]

Post clips from Nepco, nice little brackets!

i have been getting them from NEPCO PRODUCTS CO. E. PROVIDENCE, RI.

1-800-327-7562

 

[Mosh]

+2 on get a break and make your own...OR use the PVC post and frame system and be a professional! I have used these and they beat any treated 4x4 out there! http://www.auesignframes.com/default.aspx He is a member on here and does great work/price/service! Thumbs up from the Mosh!

 

[Brandon708]

Grimco has them and they are called U-Brackets. I use them all the time and work great. Just don't use the center brackets that are below the u-brackets because they are completely useless.

look on page 114 on the top right corner. They are $1.90 each.
http://www.grimco.com/catalog/Grimco_2010Catalog_Traffic.pdf