Sp-300 Cut Misalignment & need a Service Manual w/pic

[lowell_sign_design]

First off I have the sp-300 with the wasatich colorRip 2.2v and 6.9v firmware.

I spent the better part of 12 hours taking apart my machine and cleaning the encoder strip, the strip sensor, the sensor on the cutter. Did the environment match. Did the print-cut auto alignment as well as the manual alignment. No matter what I do the result is the same. (pictured below) Normally this wouldn't be a problem for most jobs but I have to do small circular stickers and they look like sh*t and its for a record label.

My stats on my printer are... Doesn't seem to do anything even if either is changed.

Cutting Calib. (F/S) : 0.00 / 0.00%

Print-cut adjust (F/S) : 0.00 / -0.90mm


I'm sure there is some way of adjusting this problem but I do not have a service manual for this machine and the manual is no help. Finding a service manual for me is a lot like trying to find a 8 star hex bit for trailer rivets. Hasn't happened!


Thanks,
Lowell

 

[Gene@mpls]

The manual / code is in the premium section.

 

[cajun312]

For the trailer screws use a #2 square driver

 

[Redwave Signs]

Shot me an email.

 

[lowell_sign_design]

For the trailer screws use a #2 square driver

I think I learned that trick in 96', first day on the job.

 

[lowell_sign_design]

So no one else has had a similar problem and had this fixed??? I highly doubt that.

 

[Fred Weiss]

SP300 Service Manual download.

A premium subscription is required for access.

 

[lowell_sign_design]

SP300 Service Manual download.

A premium subscription is required for access.

Thanks.

 

[woolly]

there are 2 adjustments

normal print and cut adjustment in the user menu
cut to alignment marks is in the service menu. on most roland machines.

woolly