SP-300V Print on canvas material?

[ABPGraphics]

I'm doing a small project printing on a piece of canvas material about 2' x 4'. I haven't printed on this media before and have no extra scrap to try a test print. I am using VersaWorks.

Does anyone have any experience printing on this media?

 

[CS-SignSupply]

I always seemed have issues with the saturation and finish quality of the black/shadow areas. Glossy/matte inconsistencies.

 

[petepaz]

how is it compared to photo-tex that is the closest thing i have printed on to canvas and i just used the solvent glossy canvas setting and it worked great

 

[Andrew O]

We have a satin and a gloss canvas available for EcoSol Max. They print very nicely on that machine and profiles for them are already in VersaWorks. We have recently shortened the roll to 25' since many canvas project only seem to require one or two prints, and we wanted to make sure users weren't committed to too much expensive material.

They are available here:

http://www.rolanddgastore.com/category.aspx?zcid=108

While the matte canvas will work with EcoSol Max, glossy or satin are better choices.

 

[Gabriel]

There is no problem printing on canvas. With a good ICC profile and a good feed calibration canvas is not at all a material to cause problems when printing on it.