sp300 0.0 problem

[petepaz]

have a problem with my sp 300 sometimes when i load the material it comes up 0.0 as the width of material and i have to shut off the machine and restart sometimes a few times
anyone ever have this problem

 

[ballgame]

You need a new flex cable

 

[InkjetAuction]

Replace cables and guides

Hey Pete,

Like Ballgame stated, you will need a new cut carriage cable and new replacement guides. You should also do the teflon tape retrofit at the same time. (Less than $40 in parts)

Call your dealer or tech for advise on moving forward.

~E

 

[petepaz]

thanks for the help/info