Stadium Graphics... How would you do it?

[NP_18]

Have a customer interested in potentially using a concrete wall around the interior of a stadium as ad space. They want the entire wall covered, but none of the outlets as you can see in the picture can be covered, and there are quite a few of them. My first thought was to have an aluminum frame made and stretch banner around it, but cutting all the outlets out of the banner sounds like a disaster waiting to happen... Also mulling the idea of using something like alumigraphics. Would be roughly 1300 linear feet and the wall is 5' tall.

 

[MikePro]

is concrete wall wrap vinyl an option? stuff sticks great, no drilling required.

 

[Lindsey]

I agree that Alumigraphics or similar would be a good approach.

 

[Reveal1]

I would be leaning towards just wrapping or using banners on that top tier, with maybe an occasional full length interspersed. Avoid the outlets and obstacles altogether.

 

[NP_18]

I would be leaning towards just wrapping or using banners on that top tier, with maybe an occasional full length interspersed. Avoid the outlets and obstacles altogether.

Would be a lot easier to do a banner frame or something similar along the top section only and would definitely make year to year switch outs a lot easier and cost effective. Think I will toss wrapping the full wall and then just doing the banner on the top at them and see what sticks. Thanks!

 

[Billct2]

I agree with frame system. All those panels will make wall wrap a pain.