Supplies Question

[mbarden]

Got a used Envisions 375 and Edge II. Need to relplace the 45 degree blade in the plotter and order a roll of Oracal printable for the Edge. What blade do I order and what is everyone printing on for general printing. I use 3651G for my SP540V and would like to stick with Oracal.
Thanks Folks
Mike B
Big River Sign Co.

 

[Billct2]

You can use any standard vinyl in the Edge. I use Gerber(3M) and Arlon, both cast and calendered.
I have local suppliers for the blades
so I don't know where you can buy them in your area, but plenty of suppliers sell online.

 

[mbarden]

Just wondering what the part number for the balde is. I am seeing several on my suppliers web site. Sorry, I should have been more clear as to what i was looking for.
Thanks
Mike B
Big River Sign Co.

 

[WhiskeyDreamer]

i use gerber and fdc vinyls mainly...occasionally for a color match i use neschen or calon...

and sorry, can't help with the part numbers...i tell my supplier when i need blades...and they send....they know what machines i have and which blades to send....makes my life easier...

 

[B Snyder]

Gerber
www.gspinc.com
800-222-7446

 

[vmw]

Clean Cut Blades
1-866-579-0963

 

[Mike Paul]

I use 651 for short term; 751 and Gerber 220 when I need cast.

 

[Service Sign Co]

30 is P30033B 45 is P33489B I guess the Envision has Different blades than the HS 15

 

[Jillbeans]

I get Gerber Blades from Hyatt's.
I did get the clean cut blades, and they are great, but too short for my 4B. I have to kind of Jerry-rig them into the cutter head.
I can also get them from Gerber or Super Sharp (not that great) from Pioneer Supply Co. in Pittsburgh.
Love....Jill

 

[Molenbeek]

The blade you need for the enVision plotter for normal 2-4 mil vinyl is the 45 degree blade. Comes in a pack of 2 - Part # P63679B.

The equivalent Oracal vinyl to use for the Gerber Edge II is 651. It comes in 15" punched format.

 

[mbarden]

Thanks much everyone,
Going to fire the Edge upnext week after I move som eequipment around.
Have a good weekend.
Mike B