-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Thick paper stock for coasters?
- Thread starter cdiesel
- Start date
I'd guess it's some sort of sheet cork (probably synth cork these days) product with a coated paper print side for use with flatbeds, no idea where you'd get it though. Or do you mean the stuff that's just like 20 pressure laminated sheets of paper? Either way, check with flatbed suppliers.
It is called pulpboard... here is one source.. If you are looking for large qty, you should be able to find it searching for chipboard and solid fibre manufactures
http://www.aceartsupplies.com/Modeling_Pulp_Board-p-1200486.html?source=googlebase
http://www.aceartsupplies.com/Modeling_Pulp_Board-p-1200486.html?source=googlebase
BigfishDM
Merchant Member
http://tms-plotters-store.com/Coasters/Drink-Coasters/flypage.tpl.html
This is what you should use! A case of 250 sheets is about $142.00 and you can do 9 per sheet but you have to run through a laser printer. I deal direct with them if you need any more info.
This is what you should use! A case of 250 sheets is about $142.00 and you can do 9 per sheet but you have to run through a laser printer. I deal direct with them if you need any more info.
300mphGraphics
New Member
You could try Kelly Paper. There are 2 in Phoenix. You can get .022 White Claycoated Chipboard that would print great on the flatbed and cut on the Zund. One 112 piece bundle of 23"x35" sheets is $81-ish. Less than $60 if you use my account. Product code 33627B. The stores probably only stock the 8½x11 size, but you could get a sample. The parent size sheets would likely be next day from LA.
Tom
Tom
300mphGraphics
New Member
You're welcome. I get 10% off trade pricing if it helps.