thesignworks
New Member
comes with rasterlink 5 pro sg - does this run windows 10
IF the version comes with the printer, is the license mine -
do I go online and update it - will I have the license - I cannot remove it from the old computer it was originally installed on.
----------------------------------
the printer is a 2010 model.
the head has been trashed - it hit the paper clamp and has a gouge in it
IT flashes no errors.
It goes through the motions.
-I have a r2880 for the head, I think the firmware was at 2.80
-should I go for a head from a wider 7880/7800
-----------------------------------
its been sat a while,
do I fit a new ink pump and lines
capping station
flush out the old solvent manifold
-------------------------------------
do I need 8 carts with 8 arc chips
I plan on refilling stock carts fitting arc chips
-------------------------------------
what am I missing?
IF the version comes with the printer, is the license mine -
do I go online and update it - will I have the license - I cannot remove it from the old computer it was originally installed on.
----------------------------------
the printer is a 2010 model.
the head has been trashed - it hit the paper clamp and has a gouge in it
IT flashes no errors.
It goes through the motions.
-I have a r2880 for the head, I think the firmware was at 2.80
-should I go for a head from a wider 7880/7800
-----------------------------------
its been sat a while,
do I fit a new ink pump and lines
capping station
flush out the old solvent manifold
-------------------------------------
do I need 8 carts with 8 arc chips
I plan on refilling stock carts fitting arc chips
-------------------------------------
what am I missing?